| Customization: | Available |
|---|---|
| Certification: | CE, RoHS |
| Application: | Heater |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Wood Furnace Water to Air Heat Exchanger
Sorted according to ventilation mode:
1. Blowing-type: Tube banks lie in the exhaust side of the blower
2. Draught fan: Tube banks lie in the inlet side of the blower
Sorted according to the installation and placing modes of the tube banks:
1. Horizontal type: Horizontally place the tube banks
2. Inclined type: Inclined place the two tube banks with the horizontal plane in 60°dip angle
3. Vertical type: The tube banks are vertically placed on both sides of the structure. It is often used by the driving blower of the natural gas engine.
This new style US market wood furnace/boiler parts heat exchanger
can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install.
This unit is easier to install than others on the market because it attachs from the front instead of the side.
|
Raw material |
(1)Cu tube:3/8mm", |
|
(2)Al foil thickness: 0.13-0.2mm |
|
|
Application |
outdoor wood furnace parts |
|
Structure |
(1)pull and expanded type |
|
(2)slant inserting type |
|
|
Key process |
prepare the material→starving tube and shaping→inserting fins and enlarging tube→ leakage test→keeping pressure→packing |
|
Performance |
(1)Surface treated with powder coating to prevent corrosion |
|
(2)inner cleanness |
|
|
(3) Can satisfy the cooling capability requirements of the designed refrigerator. |
|
|
Producing capability |
6 million sets per year |
){kind=link}